JMACX Radius Arms

How Does the Wheelbase Shorten and Why Does it Matter?

When lifting a 70 Series LandCruiser, the extra length of the front suspension causes the solid axle to pivot on the radius arms and marginally shortening the wheelbase.

JMACX Radius Arms

For those fitting 35” tyres, this may cause some clearance issues, but most in this scenario also fit 3-4inch lifts and are likely aware of the need to upgrade radius arms.

It is travellers running ~33” tyres and a common ~2” lift on their 76s, 79s and Troopies that may be yet to make the change and stand to benefit the most.

I love my 76 Series LandCruiser, but I used to hate the float of the front-end at highway speeds. It was tiring on long drives and sure didn’t inspire confidence on more challenging overtakes.

JMACX Radius Arms

With my GVM upgrade and lift, ARB fitted my Cruiser with offset bushes that helped a little but not enough. Offset bushes are a common approach from installers unless radius arm upgrades are specifically requested. Offset bushes also typically don’t wear well, and that was certainly the case for mine, which had plenty of wear at relatively low kilometres.

Since fitting the JMACX Radius Arms, the steering in my 76 Series is significantly better. It’s much more pleasant, sure-footed and safe, especially at speed. With this modification, I’m not saying it drives like an unmodified modern vehicle; it doesn’t, but for the car that it is, it is significantly better, and for me, it drives acceptably well for long travel.

About the JMACX Radius Arms

JMACX Radius Arms is fully CNC machined from premium Australian Bisalloy 80 structural steel and then SA-5 zinc coated for corrosion resistance from their Queensland factory.

JMACX Radius Arms

They are ADR compliant and are 60% stronger than OEM. They are also equivalent to the OEM radius arms weight, so they are one of the few modifications that won’t make your Cruiser heavier!

JMACX Radius Arms

JMACX Radius Arms are available to suit 2–3inch lifts, 3-4inch lifts, DPF and non-DPF vehicles.

For new vehicles, they are available without bushes, and you can refit the Toyota bushes. Our Cruiser had already been lifted and fitted with offset bushes, so we ordered the option of arms fitted with Polyelast bushes.

JMACX Radius Arms

  • Kaymar Rear Bar Toyota 76 Series LandCruiser

    Kaymar Rear Bar

    I recently switched to a Kaymar rear bar on my 76 Series LandCruiser, and in this piece, I share why I changed and my thoughts on the new bar. When...

    Kaymar Rear Bar

    I recently switched to a Kaymar rear bar on my 76 Series LandCruiser, and in this piece, I share why I changed and my thoughts on the new bar. When...

  • Madigan Line

    Madigan Line

    The Madigan Line ended up on my bucket list after my first Simpson Desert trip with Gen. We had headed down the Hay River Track to Birdsville and then back...

    Madigan Line

    The Madigan Line ended up on my bucket list after my first Simpson Desert trip with Gen. We had headed down the Hay River Track to Birdsville and then back...

  • Anne Beadell Highway

    Anne Beadell Highway

    On a whim, I decided I needed some desert time. I had my eye on the Madigan Line in the Simpson Desert and settled on the Anne Beadell Highway as...

    Anne Beadell Highway

    On a whim, I decided I needed some desert time. I had my eye on the Madigan Line in the Simpson Desert and settled on the Anne Beadell Highway as...

1 of 3