Platform Roof Rack

Choose a Quality Platform Roof Rack

Losing your roof rack on the highway or halfway up the Canning Stock Route is a nightmare best avoided. Start with a quality platform roof rack like the ROLA Titan Tray. 

The Titan Tray is a high strength choice, yet it’s relatively light. This balance is vital and means the roof rack itself doesn’t consume too much of the roof load rating or overall payload of your 4×4.

Aim To Keep The Roof Load Light

Every vehicle has a different load rating as do roof racks. Aim to keep the roof load as light as possible and always keep below the roof and rack ratings. If you are a travelling family or have no choice other than loading gear up top simply be mindful of the extra weight. You can look up the Camel Trophy Land Rovers to see what is still possible with a full roof rack!

Platform Roof Rack

If you are travelling off-road, be aware that you are top-heavy. You may need to pick easier lines through obstacles and drive more conservatively. Dropping tyre pressures will help absorb some of the bumps over corrugations which can help reduce the impact on both the roof and rack..

Pack Heavy Items Forward

Due to the rear overhang of many vehicles and the weight of fridges, drawers and spare wheels, most 4x4s are well and truly back heavy. To more evenly distribute the overall weight over the front and rear axles, it’s a good idea to pack heavier items further forward on the platform roof rack.

One of the heaviest items you might mount up top is a second spare wheel. Here we’ve used the ROLA Spare Wheel Holder. The pad eyes slot into the T channel so they can be easily positioned. The three straps are easily length adjustable to suit varying tyre sizes and ratches down securely. It’s a simple, light and secure system.

Platform Roof Rack
Platform Roof Rack

Up the front, we’ve also mounted a jerry can of extra water, our MAXTRAX and gas cylinder. The bulk of the weight on the Titan Tray is well and truly between the axles.

Position Gear With Accessibility In Mind

After a big day of travel, there’s nothing worse than clambering over a dusty vehicle to retrieve the gear you need.

Our four MAXTRAX Xtremes are ratchet strapped in place with the ROLA Recovery Holder, ready to go at the passenger side. The long handle shovel screws in place with a shovel holder. This bolts into the T channels in the side of the rack, which helps position it so it doesn’t occupy valuable rack space.

Platform Roof Rack

The 4kg gas cylinder is positioned on the side for nightly access and is cranked in place using a gas bottle holder. These are adjustable on both sides to suit most brands of the popular 4kg size.

Platform Roof Rack

Here we’ve positioned the second spare tyre centrally; it’s an item we always carry on rough trips but rarely need. We have water tanks in our Cruiser so the spare water, mounted in a ROLA Jerry Can Holder, is tucked behind the tyre in another position that’s a little harder to access.

Platform Roof Rack

Load Light Gear At The Back

Duffle bags are a great way to store bulky light gear. If you are loading sleeping gear, make sure it’s dust and waterproof.

Platform Roof Rack

It’s easy to stand on the rear step of our LandCruiser, so we’ve positioned the duffle in these images to make it easy to tie down.

Keep The Load Low

Keeping the load low will help with fuel economy, and it helps to lower the centre of gravity and with low hanging branches too!

Aim to buy quality jerry cans that won’t leak laying lengthways. This one is Mil-Spec from the brand Sceptre and has never leaked on us.

Swags are pretty hard to beat in the bush, but they are bulky! In the duffle, we have packed two full-size swags with the mattresses replaced with comfy but compact self-inflating ones. It’s a bit slower at camp, but it saves lots of space. The duffle also has sleeping gear for two.

Consider The Weight Of Accessories

Platform roof racks are a great place to mount more fixed accessories too, just be sure to account for the weight of these when packing. 

Platform Roof Rack

  • GME XRS-BT1 Push-To-Talk

    GME XRS-BT1 Push-To-Talk

    The new GME UHF Push-To-Talk Bluetooth module for the popular GME XRS radio is a practical feature that’s so simple it’s a surprise that it hasn’t been a standard issue...

    GME XRS-BT1 Push-To-Talk

    The new GME UHF Push-To-Talk Bluetooth module for the popular GME XRS radio is a practical feature that’s so simple it’s a surprise that it hasn’t been a standard issue...

  • Kaymar Rear Bar Toyota 76 Series LandCruiser

    Kaymar Rear Bar

    I recently switched to a Kaymar rear bar on my 76 Series LandCruiser, and in this piece, I share why I changed and my thoughts on the new bar. When...

    Kaymar Rear Bar

    I recently switched to a Kaymar rear bar on my 76 Series LandCruiser, and in this piece, I share why I changed and my thoughts on the new bar. When...

  • Madigan Line

    Madigan Line

    The Madigan Line ended up on my bucket list after my first Simpson Desert trip with Gen. We had headed down the Hay River Track to Birdsville and then back...

    Madigan Line

    The Madigan Line ended up on my bucket list after my first Simpson Desert trip with Gen. We had headed down the Hay River Track to Birdsville and then back...

1 of 3